TRAINERS
A micro-processor incorporates the functions of a central processing unit (CPU) on a single integrated circuit. The first microprocessors used a word size of only 4 bits, so that the transistors of its logic circuits would fit onto a single part. One or more microprocessors typically serve as the processing elements of a computer system, embedded system, or handheld device.
From the humble beginning as the drivers for calculators, the continued increase in processing capacity has led to the dominance of microprocessors over every other form of computer; every system from the largest mainframes to the smallest handheld computers now uses a microprocessor at its core. To learn the different features of microprocessor multiple kits are provided. These trainers are manufactured using Bare Board Tested Glass Epoxy SMOBC PCBs and the ICs are mounted on sockets. Exhaustive Manuals with ample of sample programs are provided with the system. Each trainer is supplied with built-in power supply.
8086 MICROPROCESSOR
TRAINERS
M86-01
8086/8088 MICROPROCESSOR TRAINING KIT
• 8086/8088 CPU operating at 2.5/5MHz
• 8086 Processor can be replaced by 8088 Processor
• On-board sockets provided to facilitate the use of 8087 Co-processor • • • • • • • •
•
• • •
and 8089 I/O Processor
16K bytes of RAM using two nos. of 6264 with Battery Backup expandable up to 256KB.
16K bytes of powerful monitor EPROM using two nos. of 27512
72 I/O lines through 3 nos. of 8255 brought at 26 Pins FRC Connector to interface with IC-XX Series.
16 bit Timer/Counter through 8253 brought out at 20 Pins FRC Connector.
RS-232C interface using 8251 brought out at 9 Pins D-Type Connector. On-board Interrupt controller using 8259 brought out at 20 Pins FRC Connector.
28 keys hexadecimal keyboard and eight seven segment display using 8279
Two modes of operation: - Keyboard Mode - Serial Mode
Powerful Commands like Examine/Edit Memory, Examine/Edit Register, Single stepping, Execution, Block Move can be used through hex keyboard or PC serial mode.
Facility for Downloading/Uploading files from/to PC.
All address, data & control lines are available on KXT Bus 50 pin FRC Connector to interface with SC-XX Series. All ICS are mounted on IC Sockets.
8086 MICROPROCESSOR
TRAINERS
• • • •
Bare board Tested Glass Epoxy SMOBC PCB is used. In-Built Power Supply of +5V/2A, ±12V/250mA
Attractive Wooden enclosures of Light weight Australian Pine Wood. User’s Manual with sample programs
OPTIONAL
• PRINTER INTERFACE to interface with DOT MATRIX Printer • Provision for EPROM Programmer for 2732/2764/27256
8086 MICROPROCESSOR
TRAINERS
M86-02
8086/8088 MICROPROCESSOR TRAINING KIT WITH LCD DISPLAY & 101 ASCII KEYBOARD
• • • • • • • •
8086/8088 CPU operating at 2.5/5MHz
8086 Processor can be replaced by 8088 Processor
On-board sockets provided to facilitate the use of 8087 Co-processor and 8089 I/O Processor
16K bytes of RAM using two nos. of 6264 with Battery Backup expandable up to 256KB.
16K bytes of powerful monitor EPROM using two nos. of 27512
72 I/O lines through 3 nos. of 8255 brought at 26 Pins FRC Connector to interface with IC-XX Series
16 bit Timer/Counter through 8253 brought out at 20 Pins FRC Connector.
RS-232C interface using 8251 brought out at 9 Pins D-Type Connector.
8086 MICROPROCESSOR
TRAINERS
• On-board Interrupt controller using 8259 brought out at 20 Pins FRC • • •
• • • • • • • •
Connector.
20x2 Alphanumeric LCD Display with Backlite.
101 ASCII Keyboard interface using 89C2051 operating @ 12MHz
Powerful Commands like Examine/Edit Memory, Examine/Edit Register, Single stepping, Execution, Block Move, Break Point can be used through ASCII keyboard.
On-board Single Line Assembler / Disassembler Facility for Downloading/Uploading files from/to PC.
All address, data & control lines are available on KXT Bus 50 pin FRC Connector to interface with SC-XX Series. All ICS are mounted on IC Sockets.
Bare board Tested Glass Epoxy SMOBC PCB is used. In-Built Power Supply of +5V/2A, ±12V/250mA
Attractive Wooden enclosures of Light weight Australian Pine Wood. User’s Manual with sample programs
OPTIONAL
• PRINTER INTERFACE to interface with DOT MATRIX Printer
• Real Time Clock using RTC6242
• PROVISION FOR EPROM PROGRAMMER FOR 2764 / 27128 / 27256
Specifications and design subject to changes without any notice
因篇幅问题不能全部显示，请点此查看更多更全内容